
ST-98000
How to install the Front Suspension Strut Mount
FrontFits 6 cars
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 6 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 2003–2007 | Ford | Ikon | L4 1.6L | |
| 2001–2007 | Ford | Ka | L4 1.6L | |
| 2002–2004 | Ford | Fiesta Ikon | L4 1.6L | |
| 1998–2001 | Ford | Fiesta | L4 1.3L | |
| 2001 | Ford | Fiesta | L4 1.6L | |
| 1998–2000 | Ford | Fiesta | L4 1.4L |
Where it goes
- 1Front Suspension Strut Mount: Front
Install steps
- 1
Get the car ready
Loosen the wheel nuts, lift the car, support it on jack stands and take the wheel off.
- 2
Take out the strut
Unbolt the strut from the knuckle and the top mount, then lift it out. Compress the spring with a spring compressor before you undo the top nut.
- 3
Front Suspension Strut Mount
Front. Fit the new strut mount on the strut, then release the spring compressor slowly.
- 4
Refit and test
Put the strut back, tighten every bolt to your car's spec and refit the wheel. Get the wheel alignment checked.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.