Rear Right Upper Suspension Strut Mount

ST-8925

How to install the Rear Right Upper Suspension Strut Mount

Rear Right UpperFits 9 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 9 cars it fits
YearsMakeModelEngineChoose
2015–2020ChevroletImpalaV6 3.6L
2015–2019ChevroletImpalaL4 2.5L
2011–2016BuickRegalL4 2.0L
2011–2016BuickRegalL4 2.4L
2016ChevroletMalibuL4 1.5L
2016ChevroletMalibuL4 1.8L
2013–2016ChevroletMalibuL4 2.0L
2013–2015ChevroletMalibuL4 2.5L

Install steps

  1. 1

    Get the car ready

    Loosen the wheel nuts, lift the car, support it on jack stands and take the wheel off.

  2. 2

    Take out the strut

    Unbolt the strut from the knuckle and the top mount, then lift it out. Compress the spring with a spring compressor before you undo the top nut.

  3. 3

    Rear Right Upper Suspension Strut Mount

    Rear Right Upper. Fit the new strut mount on the strut, then release the spring compressor slowly.

  4. 4

    Refit and test

    Put the strut back, tighten every bolt to your car's spec and refit the wheel. Get the wheel alignment checked.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.