
ST-4951
How to install the Front Lower Coil Spring Insulator
Front LowerFits 7 cars
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 7 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 1995–2003 | Lexus | ES300 | V6 3.0L | |
| 1995–2003 | Toyota | Avalon | V6 3.0L | |
| 2002–2003 | Toyota | Solara | L4 2.4L | |
| 1999–2003 | Toyota | Solara | V6 3.0L | |
| 1995–2001 | Toyota | Camry | L4 2.2L | |
| 1995–2001 | Toyota | Camry | V6 3.0L | |
| 1999–2001 | Toyota | Solara | L4 2.2L |
Where it goes
- 1Front Lower Coil Spring Insulator: Front Lower
Install steps
- 1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
- 2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
- 3
Front Lower Coil Spring Insulator
Front Lower. Remove the old mount and bolt the new one in hand-tight.
- 4
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.