ST-2937

How to install the Suspension Strut Mount

Front or RearFits 8 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 8 cars it fits

Years	Make	Model	Engine	Choose
1984–1992	Nissan	Sentra	L4 1.6L	Year
1983–1990	Nissan	Pulsar NX	L4 1.6L	Year
1988–1989	Nissan	Pulsar NX	L4 1.8L	Year
1986–1988	Nissan	Multi	L4 2.0L	Year
1986–1988	Nissan	Stanza	L4 2.0L	Year
1984–1987	Nissan	Sentra	L4 1.7L	Year
1983–1984	Nissan	Pulsar NX	L4 1.5L	Year
1983	Nissan	Pulsar	L4 1.6L

Where it goes

1
Get the car ready
Loosen the wheel nuts, lift the car, support it on jack stands and take the wheel off.
2
Take out the strut
Unbolt the strut from the knuckle and the top mount, then lift it out. Compress the spring with a spring compressor before you undo the top nut.
3
Suspension Strut Mount
Front or Rear. Fit the new strut mount on the strut, then release the spring compressor slowly.
4
Refit and test
Put the strut back, tighten every bolt to your car's spec and refit the wheel. Get the wheel alignment checked.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.