ST-1964
How to install the Rear Suspension Strut Mount
RearFits 8 cars
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 8 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 1993–2002 | Saturn | SC1 | L4 1.9L | |
| 1993–2002 | Saturn | SC2 | L4 1.9L | |
| 1991–2002 | Saturn | SL | L4 1.9L | |
| 1991–2002 | Saturn | SL1 | L4 1.9L | |
| 1991–2002 | Saturn | SL2 | L4 1.9L | |
| 1993–2001 | Saturn | SW2 | L4 1.9L | |
| 1993–1999 | Saturn | SW1 | L4 1.9L | |
| 1991–1992 | Saturn | SC | L4 1.9L |
Where it goes
- 1Rear Suspension Strut Mount: Rear
Install steps
- 1
Get the car ready
Loosen the wheel nuts, lift the car, support it on jack stands and take the wheel off.
- 2
Take out the strut
Unbolt the strut from the knuckle and the top mount, then lift it out. Compress the spring with a spring compressor before you undo the top nut.
- 3
Rear Suspension Strut Mount
Rear. Fit the new strut mount on the strut, then release the spring compressor slowly.
- 4
Refit and test
Put the strut back, tighten every bolt to your car's spec and refit the wheel. Get the wheel alignment checked.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.