
KT-1220
How to install the Front Air Suspension Kit
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 3 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 2010–2012 | Land Rover | Range Rover | V8 5.0L | |
| 2006–2009 | Land Rover | Range Rover | V8 4.2L | |
| 2006–2009 | Land Rover | Range Rover | V8 4.4L |
What's in the box 4 pieces
1Air Suspension Spring
Front Left
2Air Suspension Spring
Front Right
3Air Suspension Compressor
4Front Air Suspension Solenoid Valve Unit
Front
Where each piece goes
- 1Air Suspension Spring: Front Left
- 2Air Suspension Spring: Front Right
- 3Air Suspension Compressor
- 4Front Air Suspension Solenoid Valve Unit: Front
Install steps
- 1
Turn the air suspension off
Switch the air suspension off and let the system vent before you open any air line.
- 2
Get the car ready
Lift the car, support it on jack stands and take the wheel off. Support the axle or control arm.
- 3
Air Suspension Spring
Front Left. Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 4
Air Suspension Spring
Front Right. Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 5
Air Suspension Compressor
Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 6
Front Air Suspension Solenoid Valve Unit
Front. Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 7
Turn it back on and test
Switch the air suspension back on, start the engine and let the system fill. Check for hissing and that the car sits level.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.