
KT-1205
How to install the Front Air Suspension Kit
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 3 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 2004–2009 | Jaguar | Vanden Plas | V8 4.2L | |
| 2004–2009 | Jaguar | XJ8 | V8 4.2L | |
| 2008–2009 | Jaguar | XJR | V8 4.2L |
What's in the box 4 pieces
12 × Front Air Suspension Strut
Front
2Air Suspension Compressor
3Air Suspension Solenoid Valve Unit
Where each piece goes
- 1Front Air Suspension Strut: Front
- 2Air Suspension Compressor
- 3Air Suspension Solenoid Valve Unit
Install steps
- 1
Turn the air suspension off
Switch the air suspension off and let the system vent before you open any air line.
- 2
Get the car ready
Lift the car, support it on jack stands and take the wheel off. Support the axle or control arm.
- 3
Front Air Suspension Strut
Front. Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 4
Air Suspension Compressor
Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 5
Air Suspension Solenoid Valve Unit
Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 6
Turn it back on and test
Switch the air suspension back on, start the engine and let the system fill. Check for hissing and that the car sits level.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.