KT-1104
How to install the Rear Air Suspension System
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
The car it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 1997–2002 | Lincoln | Continental | V8 4.6L |
What's in the box 5 pieces
1Rear Left Air Suspension Spring
Rear Left
2Rear Right Air Suspension Spring
Rear Right
3Air Suspension Compressor
42 × Rear Suspension Solenoid
Rear
Where each piece goes
- 1Rear Left Air Suspension Spring: Rear Left
- 2Rear Right Air Suspension Spring: Rear Right
- 3Air Suspension Compressor
- 4Rear Suspension Solenoid: Rear
Install steps
- 1
Turn the air suspension off
Switch the air suspension off and let the system vent before you open any air line.
- 2
Get the car ready
Lift the car, support it on jack stands and take the wheel off. Support the axle or control arm.
- 3
Rear Left Air Suspension Spring
Rear Left. Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 4
Rear Right Air Suspension Spring
Rear Right. Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 5
Air Suspension Compressor
Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 6
Rear Suspension Solenoid
Rear. Disconnect the air line, remove the old part, fit the new one and reconnect the air line until it clicks.
- 7
Turn it back on and test
Switch the air suspension back on, start the engine and let the system fill. Check for hissing and that the car sits level.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.