ETK-913

How to install the 5 Piece Front Engine & Auto Trans Mount Kit

5 piecesFits 3 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 3 cars it fits

Years	Make	Model	Engine	Choose
1997–2002	Cadillac	Eldorado	V8 4.6L	Year
1997–1999	Cadillac	DeVille	V8 4.6L	Year
1997	Cadillac	Seville	V8 4.6L

What's in the box 5 pieces

Good to knowReplace all 5 together

1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
3
Front Right Engine Torque Strut Mount
Front Right. Remove the old mount and bolt the new one in hand-tight.
4
Front Left Engine Torque Strut Mount
Front Left. Remove the old mount and bolt the new one in hand-tight.
5
Right Automatic Transmission Mount
Right. Remove the old mount and bolt the new one in hand-tight.
6
Front Right Engine Mount
Front Right. Remove the old mount and bolt the new one in hand-tight.
7
Left Automatic Transmission Mount
Left. Remove the old mount and bolt the new one in hand-tight.
8
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.