ETK-543
How to install the 3 Piece Engine & Manual Trans Mount Kit
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
The car it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 2005–2008 | Ford | F-150 | V8 5.4L |
What's in the box 3 pieces
1Manual Transmission Mount
2Left Engine Mount
Left
3Right Engine Mount
Right
Where each piece goes
- 1Manual Transmission Mount
- 2Left Engine Mount: Left
- 3Right Engine Mount: Right
Install steps
- 1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
- 2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
- 3
Manual Transmission Mount
Remove the old mount and bolt the new one in hand-tight.
- 4
Left Engine Mount
Left. Remove the old mount and bolt the new one in hand-tight.
- 5
Right Engine Mount
Right. Remove the old mount and bolt the new one in hand-tight.
- 6
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.