3-Piece Front Rear Right Rear Engine Mount & Torque Strut Set

ETK-2792

How to install the 3-Piece Front Rear Right Rear Engine Mount & Torque Strut Set

3 piecesFits 2004 Mini Cooper

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

The car it fits
YearsMakeModelEngineChoose
2004MiniCooperL4 1.6L

What's in the box 3 pieces

  • Rear Engine Torque Strut Mount
    1

    Rear Engine Torque Strut Mount

    Rear

  • Rear Right Engine Mount
    2

    Rear Right Engine Mount

    Rear Right

  • Front Engine Mount
    3

    Front Engine Mount

    Front

Where each piece goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE123
  • 1Rear Engine Torque Strut Mount: Rear
  • 2Rear Right Engine Mount: Rear Right
  • 3Front Engine Mount: Front

Install steps

Good to knowReplace all 3 together
  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Rear Engine Torque Strut Mount

    Rear. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Rear Right Engine Mount

    Rear Right. Remove the old mount and bolt the new one in hand-tight.

  5. 5

    Front Engine Mount

    Front. Remove the old mount and bolt the new one in hand-tight.

  6. 6

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.