4-Piece Front Rear Upper Engine Mount & Torque Strut Set

ETK-2224

How to install the 4-Piece Front Rear Upper Engine Mount & Torque Strut Set

4 piecesFits 8 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 8 cars it fits
YearsMakeModelEngineChoose
2012–2016VolvoS60L5 2.5L
2011–2016VolvoS60L6 3.0L
2010–2016VolvoXC60L6 3.0L
2008–2015VolvoS80L6 3.0L
2010–2015VolvoXC60L6 3.2L
2009–2015VolvoXC70L6 3.0L
2008–2015VolvoXC70L6 3.2L
2010–2014VolvoS80L6 3.2L

What's in the box 4 pieces

  • Front Lower Engine Torque Strut Mount
    1

    Front Lower Engine Torque Strut Mount

    Front Lower

  • 2

    Engine Torque Strut Mount

    Right Upper or Lower or Upper or Rear

  • Engine Mount
    3

    Engine Mount

    Right or Front

  • Rear Engine Mount
    4

    Rear Engine Mount

    Rear

Where each piece goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE12222334
  • 1Front Lower Engine Torque Strut Mount: Front Lower
  • 2Engine Torque Strut Mount: Right Upper or Lower or Upper or Rear
  • 3Engine Mount: Right or Front
  • 4Rear Engine Mount: Rear

Install steps

Good to knowReplace all 4 together
  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Front Lower Engine Torque Strut Mount

    Front Lower. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Engine Torque Strut Mount

    Right Upper or Lower or Upper or Rear. Remove the old mount and bolt the new one in hand-tight.

  5. 5

    Engine Mount

    Right or Front. Remove the old mount and bolt the new one in hand-tight.

  6. 6

    Rear Engine Mount

    Rear. Remove the old mount and bolt the new one in hand-tight.

  7. 7

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.