3-Piece Front Right Front Engine & Auto Trans Mount Set

ETK-2185

How to install the 3-Piece Front Right Front Engine & Auto Trans Mount Set

3 piecesFits 4 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 4 cars it fits
YearsMakeModelEngineChoose
2016–2020KiaOptimaL4 2.4L
2015–2019HyundaiSonataL4 2.4L
2016–2019KiaOptimaL4 2.0L
2015–2017HyundaiSonataL4 2.0L

What's in the box 3 pieces

  • Front Right Engine Mount
    1

    Front Right Engine Mount

    Front Right

  • Automatic Transmission Mount
    2

    Automatic Transmission Mount

  • Engine Mount
    3

    Engine Mount

    Front Lower or Front or Lower

Where each piece goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE1333
  • 1Front Right Engine Mount: Front Right
  • 2Automatic Transmission Mount
  • 3Engine Mount: Front Lower or Front or Lower

Install steps

Good to knowReplace all 3 together
  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Front Right Engine Mount

    Front Right. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Automatic Transmission Mount

    Remove the old mount and bolt the new one in hand-tight.

  5. 5

    Engine Mount

    Front Lower or Front or Lower. Remove the old mount and bolt the new one in hand-tight.

  6. 6

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.