4-Piece Front Right Rear Right Engine Mount Set

ETK-1717

How to install the 4-Piece Front Right Rear Right Engine Mount Set

4 piecesFits 2013–2015 Volkswagen Tiguan

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

The car it fits
YearsMakeModelEngineChoose
2013–2015VolkswagenTiguanL4 2.0L

What's in the box 4 pieces

  • Engine Mount
    1

    Engine Mount

    Rear Lower or Front Lower or Front Left Lower

  • Engine Mount
    2

    Engine Mount

    Rear Upper or Front Upper

  • Right Engine Mount
    3

    Right Engine Mount

    Right

  • Engine Mount
    4

    Engine Mount

    Rear

Where each piece goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE112234
  • 1Engine Mount: Rear Lower or Front Lower or Front Left Lower
  • 2Engine Mount: Rear Upper or Front Upper
  • 3Right Engine Mount: Right
  • 4Engine Mount: Rear

Install steps

Good to knowReplace all 4 together
  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Engine Mount

    Rear Lower or Front Lower or Front Left Lower. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Engine Mount

    Rear Upper or Front Upper. Remove the old mount and bolt the new one in hand-tight.

  5. 5

    Right Engine Mount

    Right. Remove the old mount and bolt the new one in hand-tight.

  6. 6

    Engine Mount

    Rear. Remove the old mount and bolt the new one in hand-tight.

  7. 7

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.