3-Piece Front Left & Right Front Engine & Auto Trans Mount Set

ETK-1561

How to install the 3-Piece Front Left & Right Front Engine & Auto Trans Mount Set

3 piecesFits 6 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 6 cars it fits
YearsMakeModelEngineChoose
2018–2019FordF-150V6 3.3L
2015–2017FordExpeditionV6 3.5L
2015–2017FordF-150V6 2.7L
2015–2017LincolnNavigatorV6 3.5L
2011–2016FordF-150V6 3.5L
2011–2014FordF-150V6 3.7L

What's in the box 3 pieces

  • Engine Mount
    1

    Engine Mount

    Right or Front Left or Front Right

  • Engine Mount
    2

    Engine Mount

    Front Left or Front Right or Left

  • Front Automatic Transmission Mount
    3

    Front Automatic Transmission Mount

    Front

Where each piece goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE1112223
  • 1Engine Mount: Right or Front Left or Front Right
  • 2Engine Mount: Front Left or Front Right or Left
  • 3Front Automatic Transmission Mount: Front

Install steps

Good to knowReplace all 3 together
  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Engine Mount

    Right or Front Left or Front Right. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Engine Mount

    Front Left or Front Right or Left. Remove the old mount and bolt the new one in hand-tight.

  5. 5

    Front Automatic Transmission Mount

    Front. Remove the old mount and bolt the new one in hand-tight.

  6. 6

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.