
ETK-1549
How to install the 6-Piece Front Upper Lower Engine & Auto Trans Mount Set
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 68 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 1969–1972 | Chevrolet | Blazer | L6 4.1L | |
| 1969–1972 | Chevrolet | Blazer | V8 5.0L | |
| 1969–1972 | Chevrolet | Blazer | V8 5.7L | |
| 1966–1972 | Chevrolet | K10 Pickup | L6 4.1L | |
| 1969–1972 | Chevrolet | K10 Pickup | V8 5.7L | |
| 1967–1972 | Chevrolet | K10 Suburban | L6 4.1L | |
| 1968–1972 | Chevrolet | K10 Suburban | V8 5.0L | |
| 1969–1972 | Chevrolet | K10 Suburban | V8 5.7L |
What's in the box 6 pieces
12 × Front Engine Mount
Front
22 × Automatic Transmission Mount
Upper or Rear Upper
32 × Automatic Transmission Mount
Lower or Rear Lower
Where each piece goes
- 1Front Engine Mount: Front
- 2Automatic Transmission Mount: Upper or Rear Upper
- 3Automatic Transmission Mount: Lower or Rear Lower
Install steps
- 1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
- 2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
- 3
Front Engine Mount
Front. Remove the old mount and bolt the new one in hand-tight.
- 4
Automatic Transmission Mount
Upper or Rear Upper. Remove the old mount and bolt the new one in hand-tight.
- 5
Automatic Transmission Mount
Lower or Rear Lower. Remove the old mount and bolt the new one in hand-tight.
- 6
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.