5 Piece Front & Rear Engine & Manual Trans Mount Kit

ETK-1412

How to install the 5 Piece Front & Rear Engine & Manual Trans Mount Kit

5 piecesFits 4 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 4 cars it fits
YearsMakeModelEngineChoose
1996–1997HondaCivic del SolL4 1.6L
1993–1995HondaCivic del SolL4 1.5L
1992–1993HondaCivicL4 1.5L
1992–1993HondaCivicL4 1.6L

What's in the box 5 pieces

  • Rear Engine Mount
    1

    Rear Engine Mount

    Rear

  • Manual Transmission Mount
    2

    Manual Transmission Mount

  • Engine Mount
    3

    Engine Mount

    Front Left Lower or Front Left or Front Right

  • Engine Mount
    4

    Engine Mount

    Front or Front Right

  • Engine Mount
    5

    Engine Mount

    Front Left Upper or Rear Left

Where each piece goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE133445
  • 1Rear Engine Mount: Rear
  • 2Manual Transmission Mount
  • 3Engine Mount: Front Left Lower or Front Left or Front Right
  • 4Engine Mount: Front or Front Right
  • 5Engine Mount: Front Left Upper or Rear Left

Install steps

Good to knowReplace all 5 together
  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Rear Engine Mount

    Rear. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Manual Transmission Mount

    Remove the old mount and bolt the new one in hand-tight.

  5. 5

    Engine Mount

    Front Left Lower or Front Left or Front Right. Remove the old mount and bolt the new one in hand-tight.

  6. 6

    Engine Mount

    Front or Front Right. Remove the old mount and bolt the new one in hand-tight.

  7. 7

    Engine Mount

    Front Left Upper or Rear Left. Remove the old mount and bolt the new one in hand-tight.

  8. 8

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.