6 Piece Front & Rear Engine & Auto Trans Mount Kit

ETK-039

How to install the 6 Piece Front & Rear Engine & Auto Trans Mount Kit

6 piecesFits 8 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 8 cars it fits
YearsMakeModelEngineChoose
2006–2009ChevroletUplanderV6 3.9L
2006–2007BuickRendezvousV6 3.5L
2004–2006BuickRendezvousV6 3.6L
2005–2006BuickTerrazaV6 3.5L
2005–2006ChevroletUplanderV6 3.5L
2005–2006SaturnRelayV6 3.5L
2002–2005BuickRendezvousV6 3.4L
2001–2005PontiacAztekV6 3.4L

What's in the box 6 pieces

  • Engine Mount
    1

    Engine Mount

    Front Right or Right or Front Left or Front

  • Engine Torque Strut Mount
    2

    2 × Engine Torque Strut Mount

    Rear or Front

  • Front Engine Torque Strut Mount
    3

    2 × Front Engine Torque Strut Mount

    Front

  • Automatic Transmission Mount
    4

    Automatic Transmission Mount

Where each piece goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE1111223
  • 1Engine Mount: Front Right or Right or Front Left or Front
  • 2Engine Torque Strut Mount: Rear or Front
  • 3Front Engine Torque Strut Mount: Front
  • 4Automatic Transmission Mount

Install steps

Good to knowReplace all 6 together
  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Engine Mount

    Front Right or Right or Front Left or Front. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Engine Torque Strut Mount

    Rear or Front. Remove the old mount and bolt the new one in hand-tight.

  5. 5

    Front Engine Torque Strut Mount

    Front. Remove the old mount and bolt the new one in hand-tight.

  6. 6

    Automatic Transmission Mount

    Remove the old mount and bolt the new one in hand-tight.

  7. 7

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.