Front Left Automatic Transmission Mount

EM-90021

How to install the Front Left Automatic Transmission Mount

Front LeftFits 4 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 4 cars it fits
YearsMakeModelEngineChoose
2004–2015ChevroletTornadoL4 1.8L
1996–2012ChevroletChevyL4 1.6L
1999–2003ChevroletChevy PickupL4 1.6L
1994–2002ChevroletChevyL4 1.4L

Where it goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE1
  • 1Front Left Automatic Transmission Mount: Front Left

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Front Left Automatic Transmission Mount

    Front Left. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.