Engine Mount

EM-8832

How to install the Engine Mount

Front or LeftFits 6 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 6 cars it fits
YearsMakeModelEngineChoose
2010–2013Mercedes-BenzS400V6 3.5L
2003–2005Mercedes-BenzC240V6 2.6L
1998–2004Mercedes-BenzSLK230L4 2.3L
1997–2002Mercedes-BenzC230L4 2.3L
1995–1999Mercedes-BenzE300L6 3.0L
1994–1996Mercedes-BenzC220L4 2.2L

Where it goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE11
  • 1Engine Mount: Front or Left

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Engine Mount

    Front or Left. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.