
EM-7571
How to install the Left Engine Mount
LeftFits 6 cars
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 6 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 2014–2019 | BMW | 640i xDrive Gran Coupe | L6 3.0L | |
| 2014–2018 | BMW | 640i xDrive | L6 3.0L | |
| 2011–2017 | BMW | 535i GT xDrive | L6 3.0L | |
| 2011–2016 | BMW | 535i xDrive | L6 3.0L | |
| 2015 | BMW | 740Ld xDrive | L6 3.0L | |
| 2013–2015 | BMW | 740Li xDrive | L6 3.0L |
Where it goes
- 1Left Engine Mount: Left
Install steps
- 1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
- 2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
- 3
Left Engine Mount
Left. Remove the old mount and bolt the new one in hand-tight.
- 4
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.