
EM-7320
How to install the Left Engine Mount
LeftFits 5 cars
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 5 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 2006–2009 | BMW | 750Li | V8 4.8L | |
| 2006–2009 | BMW | 750i | V8 4.8L | |
| 2007–2008 | BMW | Alpina B7 | V8 4.4L | |
| 2002–2005 | BMW | 745Li | V8 4.4L | |
| 2002–2005 | BMW | 745i | V8 4.4L |
Where it goes
- 1Left Engine Mount: Left
Install steps
- 1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
- 2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
- 3
Left Engine Mount
Left. Remove the old mount and bolt the new one in hand-tight.
- 4
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.