Front Manual Transmission Mount

EM-7057

How to install the Front Manual Transmission Mount

FrontFits 6 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 6 cars it fits
YearsMakeModelEngineChoose
2012–2017HyundaiAccentL4 1.6L
2011–2016HyundaiElantraL4 1.8L
2012–2016HyundaiVelosterL4 1.6L
2012–2014DodgeAttitudeL4 1.4L
2012–2014KiaRioL4 1.6L
2011–2013DodgeAttitudeL4 1.6L

Where it goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE1
  • 1Front Manual Transmission Mount: Front

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Front Manual Transmission Mount

    Front. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.