Automatic Transmission Mount

EM-4292

How to install the Automatic Transmission Mount

Fits 8 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 8 cars it fits
YearsMakeModelEngineChoose
2013–2025Ram1500V6 3.6L
2014–2018Ram1500V6 3.0L
2011–2013Ram1500V6 3.7L
2011–2013Ram1500V8 4.7L
2011–2012Ram1500V8 5.7L
2006–2010DodgeRam 1500V8 4.7L
2009–2010DodgeRam 1500V8 5.7L
2007–2010DodgeRam 4000V8 5.7L

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Automatic Transmission Mount

    Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.