Engine Mount

EM-3117

How to install the Engine Mount

Front Right or Front or RightFits 4 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 4 cars it fits
YearsMakeModelEngineChoose
2006–2010PontiacG6L4 2.4L
2006–2008ChevroletMalibuL4 2.2L
2008ChevroletMalibuL4 2.4L
2007–2008SaturnAuraL4 2.4L

Where it goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE111
  • 1Engine Mount: Front Right or Front or Right

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Engine Mount

    Front Right or Front or Right. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.