Automatic Transmission Mount

EM-2817

How to install the Automatic Transmission Mount

Fits 69 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 69 cars it fits
YearsMakeModelEngineChoose
2000–2013GMCYukon XL 2500V8 6.0L
2007–2012ChevroletSilverado 1500V8 4.8L
2007ChevroletSilverado 1500 ClassicV6 4.3L
2007ChevroletSilverado 1500 ClassicV8 4.8L
2007ChevroletSilverado 1500 ClassicV8 5.3L
2007ChevroletSilverado 1500 ClassicV8 6.0L
1999–2005ChevroletSilverado 1500V6 4.3L
1997–2002ChevroletExpress 1500V6 4.3L

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Automatic Transmission Mount

    Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.