Automatic Transmission Mount

EM-2691

How to install the Automatic Transmission Mount

Right or Rear RightFits 9 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 9 cars it fits
YearsMakeModelEngineChoose
1990–1992CadillacAllanteV8 4.5L
1989–1991OldsmobileToronadoV6 3.8L
1989–1990BuickReattaV6 3.8L
1989–1990BuickRivieraV6 3.8L
1988–1990CadillacEldoradoV8 4.5L
1988–1990CadillacSevilleV8 4.5L
1987–1988CadillacAllanteV8 4.1L
1987CadillacEldoradoV8 4.1L

Where it goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE11
  • 1Automatic Transmission Mount: Right or Rear Right

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Automatic Transmission Mount

    Right or Rear Right. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.