Rear Left Automatic Transmission Mount

EM-2568

How to install the Rear Left Automatic Transmission Mount

Rear LeftFits 21 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 21 cars it fits
YearsMakeModelEngineChoose
1991–1993CadillacDeVilleV8 4.9L
1991–1992CadillacCommercial ChassisV8 4.9L
1991–1992CadillacFleetwoodV8 4.9L
1986–1991BuickLeSabreV6 3.8L
1986–1991OldsmobileDelta 88V6 3.8L
1987–1991PontiacBonnevilleV6 3.8L
1985–1990BuickElectraV6 3.8L
1988–1990CadillacCommercial ChassisV8 4.5L

Where it goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE1
  • 1Rear Left Automatic Transmission Mount: Rear Left

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Rear Left Automatic Transmission Mount

    Rear Left. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.