Front Left Engine Mount

EM-2438

How to install the Front Left Engine Mount

Front LeftFits 15 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 15 cars it fits
YearsMakeModelEngineChoose
1987–1991FordCountry SquireV8 5.0L
1987–1991FordLTD Crown VictoriaV8 5.0L
1987–1991FordLTD Crown VictoriaV8 5.8L
1987–1991MercuryColony ParkV8 5.0L
1979–1991MercuryGrand MarquisV8 5.0L
1982–1990LincolnTown CarV8 5.0L
1979–1989MercuryGrand MarquisV8 5.8L
1979–1986FordLTDV8 5.0L

Where it goes

FRONT OF CARENGINEDRIVER SIDEPASSENGER SIDE1
  • 1Front Left Engine Mount: Front Left

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Front Left Engine Mount

    Front Left. Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.