EM-2391

How to install the Automatic Transmission Mount

Fits 8 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 8 cars it fits

Years	Make	Model	Engine	Choose
1976–1987	Chevrolet	Chevette	L4 1.6L	Year
1976–1987	Pontiac	Acadian	L4 1.6L	Year
1981–1987	Pontiac	T1000	L4 1.6L	Year
1981–1986	Chevrolet	Chevette	L4 1.8L	Year
1981–1986	Pontiac	Acadian	L4 1.8L	Year
1980–1981	Buick	Regal	V8 4.3L	Year
1976–1977	Chevrolet	Chevette	L4 1.4L	Year
1976–1977	Pontiac	Acadian	L4 1.4L	Year

Install steps

1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
3
Automatic Transmission Mount
Remove the old mount and bolt the new one in hand-tight.
4
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.