Manual Transmission Mount

EM-2242

How to install the Manual Transmission Mount

Fits 45 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 45 cars it fits
YearsMakeModelEngineChoose
1964–1974FordCustom 500V8 5.8L
1963–1971FordCountry SedanV8 6.4L
1968–1971FordCountry SquireV8 6.4L
1969–1971FordCustom 500V8 6.4L
1967–1971FordGalaxie 500V8 6.4L
1970–1971FordLTDV8 5.8L
1968–1970FordCustom 500V8 7.0L
1965–1970MercuryMontereyV8 7.0L

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Manual Transmission Mount

    Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.