
EM-2163
How to install the Lower Manual Transmission Mount
LowerFits 8 cars
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 8 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 1969–1985 | Chevrolet | C50 | V8 5.7L | |
| 1969–1985 | Chevrolet | C60 | V8 5.7L | |
| 1969–1985 | Chevrolet | C60 | V8 6.0L | |
| 1979–1985 | Chevrolet | C70 | V8 6.0L | |
| 1969–1979 | Chevrolet | C50 | V8 6.0L | |
| 1973–1979 | Chevrolet | C50 | V8 7.0L | |
| 1973–1979 | Chevrolet | C60 | V8 7.0L | |
| 1979 | Chevrolet | C70 | V8 7.0L |
Where it goes
- 1Lower Manual Transmission Mount: Lower
Install steps
- 1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
- 2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
- 3
Lower Manual Transmission Mount
Lower. Remove the old mount and bolt the new one in hand-tight.
- 4
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.