Drive Shaft Center Support

DS-6558

How to install the Drive Shaft Center Support

Fits 20 cars

Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.

All 20 cars it fits
YearsMakeModelEngineChoose
2017–2021ChevroletExpress 2500L4 2.8L
2018–2021ChevroletExpress 2500V6 4.3L
2014–2021ChevroletExpress 2500V8 6.6L
2017–2021ChevroletExpress 3500L4 2.8L
2018–2021ChevroletExpress 3500V6 4.3L
2014–2021ChevroletExpress 3500V8 6.6L
2017–2021GMCSavana 2500L4 2.8L
2018–2021GMCSavana 2500V6 4.3L

Install steps

  1. 1

    Get the car ready

    Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.

  2. 2

    Support the engine

    Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.

  3. 3

    Drive Shaft Center Support

    Remove the old mount and bolt the new one in hand-tight.

  4. 4

    Tighten, lower, test

    Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.

Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.