CK-7622
How to install the Active to Passive Suspension Conversion Kit - Front and Rear - Cadillac (1991-1993)
Front and RearFits 3 cars
Pick your car in the car picker at the top of the page to check it fits and see the notes for your car.
All 3 cars it fits
| Years | Make | Model | Engine | Choose |
|---|---|---|---|---|
| 1993 | Cadillac | 60 Special | V8 4.9L | |
| 1991–1993 | Cadillac | Commercial Chassis | V8 4.9L | |
| 1991–1992 | Cadillac | Fleetwood | V8 4.9L |
Install steps
- 1
Get the car ready
Park on level ground, set the parking brake and disconnect the battery. Lift the car and support it on jack stands.
- 2
Support the engine
Put a jack with a block of wood under the oil pan, or use an engine support bar. Do this before you take out any mount.
- 3
Active to Passive Suspension Conversion Kit - Front and Rear - Cadillac (1991-1993)
Front and Rear. Remove the old mount and bolt the new one in hand-tight.
- 4
Tighten, lower, test
Lower the engine back down and tighten every bolt to your car's spec. Reconnect the battery, start the engine and check for movement or noise.
Torque values: Use the torque values in your car's service manual. We only show a number here once it is checked for your car.